Open Source Tools for Renesas’s reputation | Open Source Tools for Renesas

Open Source Tools for Renesas’s reputation

Open Source Tools for Renesas 825 Rep.

Follow

Open Source Tools for Renesas's reputation

Total 825

0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0

+1

May 16, 2024 Commented Hello, Thank you for reaching out to us! We are sorry for the late response and are glad that you have found the solution. Unfortunately we are offering support for toolchains only, FreeRTOS usage is outside of our domain. We recommend seeking help at https://community.renesas.com, if you encounter any other, not toolchain specific issues. For toolchain questions we remain at your disposal. __ Best regards, The Open Source Tools Team

+1

April 29, 2024 Commented Hello, Thank you, we can confirm that this is a bug. We have raised an internal ticket, a fix is likely to be included in the next release. __ Best regards, The Open Source Tools Team

+1

April 26, 2024 Commented Hello, We agree, when using -mint-register=2 -msmall-data-limit=512, r13 and r12 should be reserved and r11 should be used as small data pointer. In order to track down the source of this possible bug, could you please provide a minimal reproducible example and the version of the GCC RX toolchain used? __ Best regards, The Open Source Tools Team

+10

April 18, 2024 Answered Interrupt routine trashes registers (GCC for Renesas RX)

+10

April 15, 2024 Answered Which CPU to select for RX26T compilation.

+2

March 26, 2024 Selected answer Warning Messages from GCC for Renesas RX Compiler : _getpid, _kill

+5

March 19, 2024 Up vote answer Warning Messages from GCC for Renesas RX Compiler : _getpid, _kill

+10

March 18, 2024 Answered Warning Messages from GCC for Renesas RX Compiler : _getpid, _kill

+10

March 11, 2024 Answered Any document about Renesas RX elf relocation ?

+10

October 24, 2023 Answered Support for the RL78/G16?

+1

September 27, 2023 Commented Hello, Thank you for reaching out to us! The solution we can recommend is changing the linker script by replacing the wildcard input section specification with explicit enumeration of the input sections and start/end symbols: linkerscript: .RamSection : { __start_ramlist1__ = .; *(RamSectionList1) __end_ramlist1__ = .; __start_ramlist2__ = .; *(RamSectionList2) __end_ramlist2__ = .; ... } >RAM2 C code: extern const unsigned char _start_ramlist1; extern const unsigned char _end_ramlist1; RamSectionList1Size = &_end_ramlist1 - &_start_ramlist1; Please let us know if we can be of further assistance. __ Best regards, The Open Source Tools Team

+1

September 21, 2023 Commented Hello, Thank you for reaching out to us! The portable Linux version of LLVM for Renesas RL78 can be tried out on RHEL: https://llvm-gcc-renesas.com/downloads/download.php?f=rl78/10.0.0.202306/llvm-10.0.0.202306-rl78-elf.tar.gz Please note that the current build depends on the "ncurses" library(version 5, x86_64). If the given RHEL distribution is using a newer version of the library, the old version can be installed by: $ > yum install ncurses-compat-libs (verified on Red Hat Enterprise Linux release 8.1 (Ootpa)) Please let us know if we can be of further assistance. __ Best regards, The Open Source Tools Team

+1

September 19, 2023 Commented Hello, Thank you for reaching out to us! GCC for Renesas RL78 does not support far functions. If support for them is needed, we recommend trying out LLVM for Renesas RL78. Please let us know if we can be of further assistance. Best regards, The Open Source Tools Team

+1

September 19, 2023 Commented Hello, Thank you for reaching out. Please let us know, would you be open to switching to LLVM for RL78? __ Thank you, The Open Source Tools Team

+10

August 17, 2023 Answered Development tool setup for Renesas RX MCU

+1

August 10, 2023 Commented Thank you for letting us know. __ Kind regards, The Open Source Tools Team

+1

July 21, 2023 Commented Hello, The planned release dates for the libraries are: FDL Type04 : January, 2024 FSL Type01 : April, 2024 EEL Pack02(FDL Type02/EEL Type02) : April, 2024 We apologize for any inconvenience this may have caused and thank you for your patience. __ Best regards, The Open Source Tools Team

+1

June 28, 2023 Commented Hello NoMaY-san, Thank you for bringing this to our attention. The issue you are experiencing is caused by the lack of duplication of DLLs in both the "bin" and the "libexec" folders. As a workaround for existing releases, you can copy the missing DLLs from the \rx-elf\rx-elf\bin folder into the \rx-elf\rx-elf\libexec\gcc\rx-elf\8.3.0.-GNURX\libexec folder. We raised an internal ticket to fix this for future releases. Best regards, The Open Source Tools Team

+1

May 22, 2023 Commented ユーザーの皆様、この問題についてはサポートリクエストを開いてください。

+10

April 19, 2023 Answered RL78 GCC __far and __near modifier

« Previous 1 2 3 4 5 6 … 10 11 12 Next »

Support